GAMA DE PLC ALLEN BRADLEY

System Overview

Click to enlarge - 1761MLogix1000Fam_4C


The MicroLogix 1000 family provides small, economical programmable controllers. They are available in configurations of 10 digital I/O (6 inputs and 4 outputs), 16 digital I/O (10 inputs and 6 outputs), 25 I/O (12 digital inputs, 4 analog inputs, 8 digital outputs, and 1 analog output), or 32 digital I/O (20 inputs and 12 outputs) in multiple electrical configurations of digital I/O. The I/O options and electrical configurations make them ideal for many applications.

Benefits


  • Compact design—Lets the MicroLogix 1000 controller thrive in limited panel space.
  • Choice of communication networks—An RS-232-C communication port is configurable for: DF1 protocol for direct connection to a programming device or operator interface; DH-485 networking through a 1761-NET-AIC converter; DeviceNet networking through a 1761-NET-DNI interface; EtherNet/IP networking through a 1761-NET-ENI interface; or for half-duplex slave protocol in SCADA applications.
  • Simple programming with your choice of programming device—You can program these controllers in familiar ladder logic with MicroLogix 1000 A.I. Series Software®, PLC 500 A. I. Series Programming Software, RSLogix 500™ Windows Programming Software, or the MicroLogix Hand-Held Programmer (1761-HHP-B30). This symbolic programming language is based on relay ladder wiring diagrams that simplify the creation and troubleshooting of your control program.
  • Comprehensive instruction set—Over 65 instructions including simple bit, timer, and counter instructions, as well as instructions for powerful applications like sequencers, high-speed counter, and shift registers.
  • Fast—Execution time for a typical 500-instruction program is only 1.56 ms. 
  • Choice of languages—Software and documentation are available in 5 languages. The hand-held programmer has 6 languages built in
The MicroLogix 1100 has 10 digital inputs, 2 analog inputs and 6 digital outputs, and supports expansion I/O. Up to four 1762 I/O modules (also used on the MicroLogix 1200) may be added to the embedded I/O, providing application flexibility and support of up to 80 digital I/O.

  • One embedded 20 kHz high-speed counter (on controllers with DC inputs)—The built-in independent high-speed counter uses 32-bit integers for extended range, features 8 modes of operation, and supports direct control of outputs independent of program scan.
  • Two 20 kHz high-speed PTO/PWM outputs (on controllers with DC outputs).
  • Digital trim potentiometers—Allow quick and easy adjustments of timers, counters, setpoints, and more.
  • Program data security—Data file download protection lets a program be reloaded into the controller without overwriting protected data.
  • Floating Point Data Files—You can create data files that can contain up to 256 IEEE-754 floating point values.
  • Memory modules—Memory backup provides protection and transportability for programs and data.
  • Four interrupt inputs—Interrupt inputs let the controller scan a specific program file (subroutine) when an input condition is detected from a sensor or field device.
  • Real-Time Clock—embedded in every controller.

Communication

The combo Communication Channel 0 port provides isolated RS-232 and RS-485 electrical compatibility (on separate pins). This port supports the same protocols as the MicroLogix 1200 and MicroLogix 1500:

  • DF1 Full Duplex / DF1 Half Duplex Master & Slave / DF1 Radio Modem.
  • DH-485 (supported directly using the 1763-NC01 RS-485 cable on this port; or using the RS-232 port and existing cables, a 1761-NET-AIC and external power is required for networking).
  • Modbus™ RTU Master and RTU Slave (supported directly using the 1763-NC01 RS-485 cable on this port, or using the RS-232 port and existing cables, a 1761-NET-AIC and external power is required for networking.
  • ASCII.

Communication Channel 1 with embedded RJ45 port supports EtherNet/IP for peer-to-peer messaging:

  • 10/100 Mbps port with support for BOOTP & DHCP capability directly from the controller.
  • Automatically assign IP address through DHCP or BOOTP, or configure using RSLogix 500 programming software.
  • Monitor your IP address through the LCD screen (or use write-on nameplate).
  • Supports CIP.
  • Allows controllers to exchange data with other controllers through messaging (does not support scanning of I/O on Ethernet adapters).


The MicroLogix 1200/1762 system provides functionality between the MicroLogix 1000/1761 and MicroLogix 1500/1764 systems, using the proven MicroLogix and SLC family architecture. The 6K-word memory provides for a maximum program of 4K words and maximum data of 2K words with 100% data retention. An optional memory module provides program and data backup with program upload and download capability. The optional real-time clock enables time scheduling of control activities. The flash upgradeable operating system lets you upgrade system software without replacing hardware.
Click to enlarge - 1762MLogix1200SysOver_GS


Benefits

  • Small Footprint—The MicroLogix 1200 controller is designed to optimize panel space. Integrated packages just 90mm (3.54 in) high (110mm high including mounting tabs) and 110 or 160mm (4.33 or 6.30 in) wide include processor, embedded inputs and outputs, and power supply. Expansion I/O modules add only 40mm (1.57 in) each in width.
  • Flexibility—A range of I/O and communication options let you configure a MicroLogix 1200 controller for a variety of applications:
    • 24 or 40 built-in I/O. The inputs are either 24V DC (sink or source) or 120V AC. Outputs are relay contact or FET.
    • Add up to 96 I/O in up to 6 digital and/or analog I/O modules (within the limits of power supply capacity, for a total of 136 I/O maximum).
  • Wide range of communication options:
    • DF1 full- or half-duplex, DF1 Radio Modem, Modbus RTU slave and RTU master. Communication interface modules support DH-485, DeviceNet, and EtherNet/IP.
    • MicroLogix 1200R controllers also provide a Programming / HMI port with fixed communication parameters to provide an additional means to communicate to the controller.
  • High Functionality—The MicroLogix 1200 / 1762 system provides powerful features that let you tackle tough applications:
    • 20k-Hz high-speed counter.
    • 20k-Hz PTO (Pulse Train Output) or PWM (Pulse Width Modulation).
    • 6K-word non-volatile memory (4K-word maximum program, 2K-word maximum data).
    • 4 interrupt inputs.
    • 4 latching inputs.
    • 2 built-in trim potentiometers.
    • optional memory, real-time clock, or memory/real-time clock module.
    • powerful instruction set with support for PID and ASCII.
    • uses RSLogix 500 programming software.
    • field-upgradeable flash operating system.
  • Low Price—This compact but powerful control solution will fit well within your budget.



Product Design

The MicroLogix 1200 controller and expansion I/O modules provide a modular, rackless control system designed for ease of installation and maintenance. Each MicroLogix 1200 controller includes a processor, built-in I/O, and power supply. Expansion I/O modules install to the right of the controller. Cables built into the I/O modules provide connection to the adjacent I/O module or controller. Controllers and I/O modules can be mounted either on a panel or on a DIN-rail. I/O on both controller and expansion I/O modules have finger-safe terminal blocks to meet global safety standards. The 40-I/O controllers have removable terminal blocks to facilitate ease of wiring and maintenance.

  • Four latching or pulse-catch inputs—Latching inputs let the controller capture and hold very brief (microsecond) signals for input processing.
  • 20k Hz high-speed counter—The built-in independent high-speed counter uses 32-bit integers for extended range, features 8 modes of operation, and supports direct control of outputs independent of program scan.
  • Programmable Limit Switch Function—The Programmable Limit Switch function allows you to configure the high-speed counter to operate as a programmable limit switch or rotary cam switch.
  • Trim potentiometers—Two built-in 3/4-turn analog trim potentiometers with a digital output (range from 0 to 250) allow quick and easy adjustments of timers, counters, setpoints, and more.
  • Program data security—Data file download protection lets a program be reloaded into the controller without overwriting protected data.
  • Floating Point Data Files—You can create data files that can contain up to 256 IEEE-754 floating point values.
  • Memory, real-time clock, or memory/real-time clock modules—Memory backup provides protection and transportability for programs and data. The real-time clock lets you easily solve time/date scheduling applications, and can be synchronized with an external source via a program instruction.
  • Four interrupt inputs—Interrupt inputs let the controller scan a specific program file (subroutine) when an input condition is detected from a sensor or field device.

Operator Interfaces

Many Allen-Bradley operator interface products can be used with MicroLogix 1200 controllers. The PanelView 300 Micro operator interface is a small, low cost, easy-to-use operator interface that is designed for use with the MicroLogix 1200 controller.


Product Design

The MicroLogix 1400 system offers higher I/O count, faster high-speed counter/PTO, and enhanced network capabilities. MicroLogix 1400 controllers without embedded analog come with 32 digital I/O count, while analog versions have 32 digital I/O and 6 analog I/O. All versions can be expanded using up to seven 1762 I/O modules — the same I/O modules that MicroLogix 1100 and 1200 controllers utilize.

The MicroLogix 1400 controller houses embedded inputs, outputs, power supply, and communication ports. It also provides the interface to expansion I/O when required by an application.


Features

  • Up to six embedded 100 kHz high-speed counters (on controllers with DC inputs).
  • Two serial ports with DF1/DH-485/Modbus RTU/DNP3/ASCII protocol support.
  • Embedded 10/100 Mbps Ethernet port with EtherNet/IP, Modbus TCP/IP and DNP3 over IP support
  • 10K words user program memory and 10K words user data memory.
  • Up to 128 KB for data logging and 64 KB for recipe.
  • Program with RSLogix 500 or RSLogix Micro programming software.



MicroLogix 1500 Processors

The standard MicroLogix 1500 processor (1764-LSP) provides 7.65K words of user-configurable memory for program and data. The enhanced MicroLogix 1500 processor (1764-LRP) provides 14K words of user-configurable memory for program and data. An optional memory module (1764-MM1 or -MM2) can be installed to back up the program and data. A backup memory and real-time clock module (1764-MM1RTC or -MM2RTC), or the real-time clock only module (catalog number 1764-RTC) can be installed separately instead of a memory module.

Program and data file sizes are user-configurable. Maximum user data is 4K words. 

Click to enlarge - 1769MLxValidCombi_BW


You can create long-integer data files (32-bit signed integer, ±2 billion) for use with math and embedded high-speed I/O instructions. You can also create floating point data files, each of which can contain up to 256 IEEE-754 floating point data elements.

The MicroLogix 1500 processes a typical 1K word user program (including bit, timer, counter, and math instructions) in approximately 1ms. Programs are created using Windows-based RSLogix 500 programming software. Programs written for other Allen-Bradley MicroLogix and SLC 500 controllers can be easily modified for use with the MicroLogix 1500 controller.

Two built-in 3/4-turn analog trim potentiometers with a digital output (range from 0 to 250) allow quick and easy adjustments of timers, counters, set points, and more. The optional Data Access Tool (catalog number 1764-DAT) adds the functions of 48 electronic push buttons, 48 electronic digital trim potentiometers, and two function keys. Trim potentiometer and Data Access Tool data is available to the user program through built-in function files.

The MicroLogix 1500 processor supports backplane messaging, which allows the processor to read or write data to other devices on DeviceNet. PCCC and CIP messaging are supported. Processor memory includes function files that store user-specified configuration data for system resources:


  • Selectable Timed Interrupts
  • Event Input Interrupt
  • High-Speed Counters
  • Pulse Train Output
  • Pulse Width Modulation
  • Base Hardware Information
  • Memory Module
  • Data Access Tool
  • Trim Potentiometers
  • Real-Time Clock
  • Communication Status
  • I/O Status
  • Programmable Limit Switch
  • Recipe Data
SLC Processors

The SLC processors offer a wide range of choices in memory, I/O capacity, instruction set, and communication ports to allow you to tailor a control system to your exact application requirements. These products have a strong reliability history covering hundreds of thousands of installations in a broad range of applications.

SLC 5/01 processors let you configure modular controllers of up to 960 I/O and a 1K- or 4K-instruction memory capacity.

SLC 5/02 processors let you configure modular controllers of up to 4096 inputs plus 4096 outputs nominally and a 4K-instruction memory. By installing an optional scanner module into one of the 30 I/O module slots, you can add ControlNet I/O, DeviceNet I/O, or Universal Remote I/O to the system. They offer 19 additional instructions, including a message instruction for initiating peer-to peer communication.

SLC 5/03 processors let you configure modular controllers of up to 4096 inputs plus 4096 outputs and a memory of 8K, 16K, or 32K words. In addition to the features of the SLC 5/02, they have a second built-in communication port—an RS-232-C port that can be configured for ASCII or DF1 protocol, and can be configured for connection to a 1761-NET-AIC converter to provide access to a DH-485 network. SLC 5/03 processors provide bit-instruction execution times of 0.44 ms and an overall system throughput of up to 10 times faster than competitive processors. Additional capabilities include: floating-point math, online programming and run-time editing, flash memory upgrades, built-in key-switch, and a built-in real-time clock and calendar.

SLC 5/04 and 5/05 processors let you configure modular controllers of up to 4096 inputs plus 4096 outputs and a memory of either 16K, 32K, or 64K words. They have all the features of the SLC 5/03 processors, plus a faster communication port and shorter execution times (bit-instruction execution times of 0.37ms). Instead of a DH-485 port, the SLC 5/04 has a built-in DH+ port for communication with other SLC 5/04 and PLC processors, operator interfaces, and programming terminals. Communication via the DH+ network is three times faster than DH-485 communication. SLC 5/05 processors provide a 10/100BASE-T, 10 or 100 Mbps Ethernet port.


Benefits

  • Simple and affordable processors with broad capabilities to address applications such as material handling, HVAC control, assembly operations, small process control, and SCADA applications.
  • Advanced instruction set based on PLC-5 mid-size processors.
  • Broad line of digital and analog I/O modules, including intelligent I/O modules and including I/O modules available from third-party (Encompass™ program) vendors.
  • Each SLC 5/01 processor has a DH-485 port for programming and processor-to-processor communication initiated from the other node.
  • SLC 5/02, SLC 5/03, SLC 5/04 and SLC 5/05 processors have communication ports (Ethernet, DH+, DH-485, or RS-232-C) that can initiate communication.
  • Add ControlNet I/O (1771-, 1746-, 1793-, 1794-, 1797-I/O modules) with a 1747-SCNR15 scanner module.
  • Add DeviceNet I/O (1791D-, 1793-, and 1794-I/O module and 1792-I/O blocks) with a 1747-SDN scanner module.
  • Add Universal Remote I/O (1746-, 1771-, 1793-, and 1794-I/O modules and 1791-I/O blocks) with a 1747-SN scanner module.
  • Add BASIC programming capability and DH-485 and RS-232 communication ports with a 1746-BAS or 1746-BAS-T module.